A
-
Afra, Elyas
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Alinia, Sahba
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Azadfallah, Mohammad
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
-
Azadfallah, Mohammad
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
B
-
Behrooz, Rabi
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
-
Besharati far, Kmran
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
C
-
Chavoshi, Arash
Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2012, Pages 52-66]
D
-
Dalvand, Mosayeb
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Darabi, Peyvand
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Darstan, Rasoul
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Dehghani, M.Reza
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
-
D.Hosseini, Kazem
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2012, Pages 43-52]
E
-
Ebrahimi, Ghanbar
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
-
Ebrahimi, Ghanbar
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Elyasi, Abdollah
Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2012, Pages 43-52]
F
-
Faezipour, M.Mahdi
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
G
-
Ghahri, Saman
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Ghalandar zadeh, Abbas
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
-
Ghasemian, Ali
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
-
Gholamian, Hadi
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Ghorbani, Maryam
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
H
-
Hamzeh, Yahya
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
-
Hamzeh, Yahya
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Hemmat abadi, Hojjat
Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
I
-
Imani, Monireh
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
J
-
Jalili, M.Mahdi
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
K
-
Kamrani, Saeid
The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
-
Kargarfard, Abolfazl
The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites [Volume 3, Issue 2, 2013, Pages 131-140]
-
Karimi, A.Naghi
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Kermanian, Hossein
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Khazaian, Abolghasem
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2012, Pages 13-27]
-
Khazaian, Abolghasem
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
-
K.Najafi, Saeid
A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
-
Kord, Behzad
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
-
Kord, Behzad
Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
M
-
Madhoushi, Mehrab
Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2012, Pages 52-66]
-
Maleki, Sadegh
Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
-
Masoumi, Zahra
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
-
Mirzaee, Ghane
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
-
Mirzazad, Fahimeh
Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
-
Mohammadzadeh, Kamel
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Mohebbi, Behbood
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
-
Moradi, Masoumeh
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Moradifar, Alireza
The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
-
Mousavi, Saeid
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Musavi, Tahereh
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
-
Musavi, Yahya
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
N
-
Naghizadeh, Zahra
Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
-
Najafi, Abdollah
Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
-
Najafi, Abdollah
Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
-
Nazarnezhad, Noorodin
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
P
-
Pirayeshfar, Amir hossein
A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
R
-
Ramezani, Omid
Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
-
Resalati, Hossein
The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
-
Resalati, Hossein
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
-
Rezvani, Mohammad
Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
S
-
Sakalo, Mozhgan
The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2012, Pages 13-27]
-
Seraian, A.Reza
The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
-
Shakeri, Alireza
Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
-
Shamsian, Mohammad
Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
-
Siahposht, Hassan
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
T
-
Tabarsa, Taghi
Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
-
Taghiyari, Hamidreza
Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
-
Tajvidi, Mahdi
Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
-
Tavasoli, Afshin
Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
Y
-
Yadoollahi, Soghra
The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
-
Yousefi, Hossein
Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
Z
-
Zabihzadeh, Majid
Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
-
Zeyni, Farhad
A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
Your query does not match with any item